Cat.6A U/FTP PVC, PE, LSZH 4x2x23 AWG

Application

Multicore and symmetrical twisted pair cable for digital communications:

• Type Cat. 6A U/FTP 4x2x23 AWG is designed for structured cabling networks with single laying inside buildings, constructions and equipment. This cable type can operate at frequencies up to 500 MHz, 10 Gbit/s 10 Gigabit Ethernet in conditions of increased electromagnetic action.

• Type Cat. 6A U/FTP 4x2x23 AWG LSZH is designed for structured cabling networks with single laying and laying in bundles inside buildings, constructions and equipment. This cable type can operate at frequencies up to 500 MHz, 10 Gbit/s 10 Gigabit Ethernet in conditions of increased electromagnetic action  and where low smoke emission is required.

• Type Cat. 6A U/FTP 4x2x23 AWG PE is designed for structured cabling networks with external laying along the walls of buildings, constructions, in mines and collectors. This cable type can operate at frequencies up to 500 MHz, 10 Gbit/s 10 Gigabit Ethernet in conditions of increased electromagnetic action.

Cable structure

• Conductive core: 23 AWG copper soft wire

• Insulation: Physical foam PE in compliance with TIA 568 insulation color coding

• Screen: Al-PET tape min 100% coverage

• A tinned copper drain wire Ø 26 AWG

• Sheath:

PVC RAL 7001 Grey

PE RAL 9011 Black

LSZH/LS0H RAL 2003 Orange

SPECIFICATIONS

Temperature range:
• fixed	-20°C…+60°C
• flexing	0°C…+50°C
Bending radius:
• fixed	min. 4 x D
• flexing	min. 8 x D
Tensile strength	max. 100 N
Crushing strength	min. 1000 N/10 cm
Impact strength	min. 10 impacts
Conductor resistance	max. 85 Ω/km
Resistance imbalance	max. 2%
Insulation resistance	min. 5000 MΩ x m
Capacitance	max. 56 pF/m
Capacity imbalance	max. 1600 pF/km
Velocity of propagation	78-80%
Propagation delay	max. 537 ns/100 m
Signal delay	max. 25 ns/100 m
Test voltage	1000 V
Operating voltage	max. 72 V

TCL min. «Level 2»
Coupling attenuation «Type II»
Transfer impedance «Class 2»