Cat.6 F/UTP PVC, LSZH, PE 4x2x0,51

Application

Multicore and symmetrical twisted pair cable for digital communications:

• Type Cat. 6 F/UTP 4x2x0,51 is designed for structured cabling networks with single laying inside buildings, constructions and equipment. This cable type can operate at frequencies up to 250 MHz in conditions of increased electromagnetic action;

• Type Cat. 6 F/UTP 4x2x0,51 LSZH is designed for structured cabling networks with single laying and laying in bundles inside buildings, constructions and equipment. This cable type can operate at frequencies up to 250 MHz in conditions of increased electromagnetic action and where low smoke emission is required;

• Type Cat. 6 F/UTP 4x2x0,51 PE is designed for structured cabling networks with external laying along the walls of buildings, constructions, in mines and collectors. This cable type can operate at frequencies up to 250 MHz in conditions of increased electromagnetic action.

Cable structure

• Conductive core: 0,51 mm copper soft wire

• Insulation: HDPE polyethylene, colored marking of insulation

• Cross divider

• Screen: Al-Pet tape min. 100% coverage

• Pet tape min. 100% coverage

• A tinned copper contact wire, Ø 26 AWG

• Sheath:

LSZH/LS0H RAL 2003 Orange

PVC RAL 7001 Grey

PE RAL 9011 Black

SPECIFICATIONS

Temperature range:
• fixed	-20°C…+60°C
• flexing	0°C…+50°C
Bending radius:
• fixed	min. 4 x D
• flexing	min. 8 x D
Tensile strength	max. 100 N
Conductor resistance	max. 95 Ω/km
Resistance imbalance	max. 2%
Insulation resistance	min. 5000 MΩ x m
Capacitance	max. 56 pF/m
Capacity imbalance	max. 1600 pF/km
Velocity of propagation	67-69%
Propagation delay	max. 537 ns/100 m
Signal delay	max. 45 ns/100 m
Test voltage	1000 V
Operating voltage	max. 72 V

TCL min. «Level 2»
Coupling attenuation «Type II»
Transfer impedance «Class 2»